? semiconductor components industries, llc, 2013 february, 2013 ? rev. 5 1 publication order number: murs360bt3/d murs360bt3g, SURS8360BT3G surface mount ultrafast power rectifiers ideally suited for high voltage, high frequency rectification, or as free wheeling and protection diodes in surface mount applications where compact size and weight are critical to the system. features ? small compact surface mountable package with j ? bend leads ? rectangular package for automated handling ? high temperature glass passivated junction ? surs8 prefix for automotive and other applications requiring unique site and control change requirements; aec ? q101 qualified and ppap capable ? these are pb ? free devices* mechanical characteristics ? case: epoxy, molded ? epoxy meets ul 94 v ? o @ 0.125 in ? weight: 95 mg (approximately) ? finish: all external surfaces corrosion resistant and terminal leads are readily solderable ? lead and mounting surface temperature for soldering purposes: 260 c max. for 10 seconds ? polarity: polarity band indicates cathode lead ? esd rating: ? human body model (hbm) 3b (> 8 kv) ? machine model (mm) c (> 400 v) maximum ratings rating symbol value unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 600 v average rectified forward current i f(av) 3.0 @ t l = 105 c a non ? repetitive peak surge current (surge applied at rated load conditions halfwave, single phase, 60 hz) i fsm 100 a operating junction temperature t j 65 to +175 c stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above the recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliability. *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. ultrafast rectifiers 3 amperes 600 volts device package shipping ? ordering information smb case 403a http://onsemi.com murs360bt3g smb (pb ? free) 2,500 / tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our t ape and reel packaging specifications brochure, brd8011/d. b36b = specific device code a = assembly location y = year ww = work week = pb ? free package ayww b36b marking diagram (note: microdot may be in either location) SURS8360BT3G smb (pb ? free) 2,500 / tape & reel
murs360bt3g, SURS8360BT3G http://onsemi.com 2 thermal characteristics characteristic symbol value unit thermal resistance, junction ? to ? lead (note 1) thermal resistance, junction ? to ? ambient (note 1) r jl r ja 14 125 c/w 1. mounted with minimum recommended pad size, pc board fr4. electrical characteristics characteristic symbol typ max unit maximum instantaneous forward voltage (note 2) (i f = 3.0 a, t j = 25 c) (i f = 3.0 a, t j = 150 c) v f ? 0.83 1.25 1.05 v maximum instantaneous reverse current (note 2) (rated dc voltage, t j = 25 c) (rated dc voltage, t j = 150 c) i r ? 95 3.0 150 a maximum reverse recovery time (i f = 1.0 a, di/dt = 50 a/ s) (i f = 0.5 a, i r = 1.0 a, i r to 0.25 a) t rr ? ? 75 50 ns maximum forward recovery time (i f = 1.0 a, di/dt = 100 a/ s, rec. to 1.0 v) t fr ? 50 ns 2. pulse test: pulse width = 300 s, duty cycle 2.0%. typical characteristics figure 1. typical forward voltage figure 2. maximum forward voltage v f , instantaneous forward voltage (v) v f , instantaneous forward voltage (v) 1.2 1.1 0.8 0.7 0.6 0.5 0.4 0.3 0.01 0.1 1 10 1.2 1.1 1.0 0.7 0.6 0.5 0.4 0.3 0.01 0.1 1 10 figure 3. typical reverse current figure 4. maximum reverse current v r , reverse voltage (v) v r , reverse voltage (v) 600 500 400 300 200 100 0 0.000001 0.00001 0.0001 0.001 0.01 0.1 600 500 400 300 200 100 0 i f , instantaneous forward current (a) i r , reverse current (ma) 1.0 0.9 150 c 125 c 25 c i f , instantaneous forward current (a) 0.8 0.9 1.4 1.3 150 c 125 c 25 c 150 c 125 c 25 c i r , reverse current (ma) 0.00001 0.0001 0.001 0.01 0.1 150 c 125 c 25 c 1
murs360bt3g, SURS8360BT3G http://onsemi.com 3 typical characteristics square figure 5. typical capacitance figure 6. current derating, lead v r , reverse voltage (v) t c , case temperature ( c) 100 80 60 40 20 0 0 10 20 30 40 50 60 70 155 135 125 115 105 85 75 65 0 1 2 3 4 5 figure 7. current derating, ambient figure 8. typical forward power dissipation t a , ambient temperature ( c) i f(av) , average forward current (a) 150 125 100 75 50 25 0 0 1 2 3 4 3 2 1 0 0 1 2 3 4 figure 9. maximum forward power dissipation c, capacitance (pf) i f(av) , average forward cur- rent (a) i f(av) , average forward current (a) p f(av) , average power dissipa- tion (w) t j = 25 c f = 1 mhz 95 145 dc square wave dc dc r ja = 71 c/w r ja = 120 c/w no heatsink square wave dc t j = 150 c i f(av) , average forward current (a) 4 3 2 1 0 0 1 2 3 4 p f(av) , average power dissipation (w) square wave dc t j = 150 c 10 100 1000 10000 10 100 1,000 10,000 i fsm , non ? repetitive surge current (a) t p , square wave pulse duration ( s) figure 10. typical non ? repetitive surge current *typical performance based on a limited sample size. on semiconductor does not guarantee ratings not listed in the maximum ratings table.
murs360bt3g, SURS8360BT3G http://onsemi.com 4 figure 11. thermal response, junction ? to ? ambient pulse time (s) 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 0.01 0.1 1 10 100 r(t) ( c/w) single pulse 50% duty cycle 20% 10% 5% 2% 1%
murs360bt3g, SURS8360BT3G http://onsemi.com 5 package dimensions smb case 403a ? 03 issue j e b d c l1 l a a1 notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. dimension b shall be measured within dimension l1. 2.261 0.089 2.743 0.108 2.159 0.085 mm inches scale 8:1 *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* dim a min nom max min millimeters 1.95 2.30 2.47 0.077 inches a1 0.05 0.10 0.20 0.002 b 1.96 2.03 2.20 0.077 c 0.15 0.23 0.31 0.006 d 3.30 3.56 3.95 0.130 e 4.06 4.32 4.60 0.160 l 0.76 1.02 1.60 0.030 0.091 0.097 0.004 0.008 0.080 0.087 0.009 0.012 0.140 0.156 0.170 0.181 0.040 0.063 nom max 5.21 5.44 5.60 0.205 0.214 0.220 h e 0.51 ref 0.020 ref d l1 h e polarity indicator optional as needed on semiconductor and are registered trademarks of semiconductor co mponents industries, llc (scillc). scillc owns the rights to a numb er of patents, trademarks, copyrights, trade secrets, and other intellectual property. a list ing of scillc?s product/patent coverage may be accessed at ww w.onsemi.com/site/pdf/patent ? marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and s pecifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. all operating parame ters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the right s of others. scillc products are not designed, intended, or a uthorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in whic h the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or us e scillc products for any such unintended or unauthorized appli cation, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unin tended or unauthorized use, even if such claim alleges that scil lc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyrig ht laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5817 ? 1050 murs360bt3/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
